Just some of the unique gear grinding wheels we see here at Mach-B. All wheels were speed tested passed at 5,000 RPM’s. These wheels are 12″ x 9″ and weigh 55 pounds each.

By Mach-B

Just some of the unique gear grinding wheels we see here at Mach-B. All wheels were speed tested passed at 5,000 RPM’s. These wheels are 12″ x 9″ and weigh 55 pounds each.

By Mach-B

Has your grinding wheel diameter changed? Use the **Mach-B RPM Calculator** to determine the correct RPM to maintain your SFPM. Simply enter the Wheel Diameter and SFPM below.

[CP_CALCULATED_FIELDS id=”6″]

Have the RPM and need to calculate the SFPM? Try the **Mach-B SFPM Calculator**.

By Mach-B

Need to know your grinding wheel’s SFPM? Enter the Wheel Diameter and RPM below.

[CP_CALCULATED_FIELDS id=”7″]

Do you have the SFPM and need to calculate the RPM? Check out our RPM Calculator.

By Mach-B

In the world of grinding, there are two measures for speed that you need to know and understand how they affect one another.

RPM and SFPM.

**RPM** = Revolutions Per Minute; defined as the number of complete axis turns per minute

**SFPM** = Surface Feet Per Minute; defined as the distance any one abrasive grain on the cutting surface travels per minute.

Grinding wheel speeds are generally given in SFPM while machine speeds are usually noted in RPM. Since these numbers are measured at different locations on the grinding wheel, you must know how to convert one to the other.

The basic equation is:

SFPM = Wheel Diameter in inches x RPM x 0.262

**Why is this important?**

As your grinding wheel wears, the SFPM will decrease. To maintain the same grinding characteristics, you’ll want to maintain the SFPM. In order to maintain the SFPM you need to increase the RPM.

Okay, that sounded like a lot of gibberish, didn’t it? Here’s an example that should clear things up:

Grinding Wheel Diameter = 24″, Machine Speed = 600 RPM; SFPM = 3772.8. As the wheel wears to, say, 21″, SFPM will slow to 3144 if RPM stays at 600. To maintain 3772.8 SFPM the RPM will need to be increased to 720.

Now, you can get these calculations using pen and paper (or your trusty calculator) but we’ve made it easy for you but creating a couple of online calculators. All you need to do is plug in the appropriate figures and you’ll get your RPM or SFPM.

156 Galewski Drive

Winona, MN 55987

Toll-Free: 1-800-533-8010

Local: 507-452-1830